S.M.A.R.T Repair

by | Aug 19, 2015 | News, Videos

S.M.A.R.T. Stands for Small Medium Advanced Repair Technology. Made possible with Infra Red curing light technology we are able to carry out a repair that in the past would have taken a few days but in this case it took 5 hours. Watch the video below and learn from a...

How to Flow Coat

by | Aug 18, 2015 | Videos

Flow Coating is a great way to achieve the best gloss and depth from your paint.The basic process is to paint your panel with base and clear then allow it to cure for at least 3 days then sand it back down and apply a further 2-3 coats of clear.I will be using the...

Fiberglass Repairs

by | Aug 16, 2015 | Videos

Repairing Fiberglass is quite a simple process once you know how its done, follow this simple and easy to understand tutorial video and I will take you right through including prep work and materials used, I will also take you through the body filler and primer work...

LH Torana Repair & Prime, Time Lapse

by | Aug 13, 2015 | Videos

Part 4 of the Murdered LH Torana Project is a time lapse video and will go through Body Repairs & Primer Work. Hours of work slammed into under 7 minutes of video, as always I have included loads of technical info on how I completed the project in easy to...

Corvette Stingray Cut & Polish

by | Aug 8, 2015 | Videos

Part 4 of the 1970 Corvette Stingray will go through the polishing stage. This video will finish off a 4 part video set on this beautiful old C3 Corvette Stingray. The previous videos have taken you right through the Prep Work, Basecoat and Clearcoat.watch this video...
Translate »