Turbo Conversion

by | Dec 9, 2015 | Videos

in Part 5 of my VL Holden Commodore project I will take you through the conversion of the Nissan RB30 NA engine to a Turbo engine, I have listed everything that we needed to do the conversion and incase you missed anything I will list them here. Extractors to suit...

Under Body Protection & VL Update

by | Dec 9, 2015 | Projects, Videos

Underbody Protection is a very important part of doing rust repairs, if you don’t seal all the bare steel up and coat it with a rust and stone chip preventative then the rust will just come straight back and after spending the amount of time I did removing the...

Rust Repair Cut & Weld New Boot floor

by | Dec 9, 2015 | Projects, Videos

In Part 4 of my VL Commodore Project I am removing the boot (trunk) floor and welding a new rust repair section in, I had a little help from a friend and together I am very happy with the end result, the next video will be doing the Seam Sealer, Body Deadener and...

Prep, Paint & Polish VL Boot

by | Dec 9, 2015 | Automotive Refinishing, Videos

In part 3 of my VL Turbo Project I will be Preparing, Painting & Polishing the outside of the boot lid, I use my new SATAjet 5000B RP 1.3mm Digital for clear and was very happy with the results, plus the DeVilbiss SGK-600-BV 1.4mm for basecoat and again its the...

VL Turbo Project, Part 1

by | Dec 9, 2015 | News, Projects

This is the first video on my VL Commodore project, I will give you a look over the work that we have done so far. The car is a factory SL with an RB30 Nissan engine and has had a turbo bolted up to it after market, the car does have some rust in the usual places but...

VL Calais Respray Part 5

by | Dec 8, 2015 | News, Projects, Videos

In part 5 on the VL Calais we will be finalizing the project and doing all the finishing touches preparing the car for the owner to pickup, there is still lots of parts to be painted so in this video I will take you through the entire job including loads of technical...

VL Calais Polish Paint, Repair & Paint bars

by | Dec 8, 2015 | News, Projects, Videos

In Part 4 of the Respray on this Holden VL Calais I will take you through the polishing stage including info on all the products I use and methods required for best results. I will also include repairing and priming the bumper bars, the silver basecoat I used on the...

VL Calais Respray Part 3 Clear Coat

by | Dec 8, 2015 | Automotive Refinishing

In part 3 of the Repair & Respray on this Holden VL Calais I will take you through the Paintwork on the Body to begin then go on to the bolt on panels, I used the DeVilbiss SGK/FLG5 1.4mm for basecoat and SATAjet 5000B RP 1.3mm Digital for clear, The colour is...
Translate ยป