1970 Corvette Stingray, Prep & Mask

by | Dec 10, 2015 | Projects, Repairs, Videos

In Part 1 of the 1970 C3 Corvette Stingray I will be doing Prep work and Masking for paint. As a boy I had a model Corvette Stingray and have spent many hours admiring the beauty of these cars so it was an honour to finally get the chance to work on one of these...

MK1 GT Ford Cortina Part 2

by | Dec 10, 2015 | Projects, Videos

In Part 2 of the classic 1966 MK1 GT Ford Cortina project we will pick up right where part 1 left off, continuing on with the body repairs and then go on to mask it up for primer, I have included lots of technical info as you would expect from any Gunman video. Sit...

Under Body Protection & VL Update

by | Dec 9, 2015 | Projects, Videos

Underbody Protection is a very important part of doing rust repairs, if you don’t seal all the bare steel up and coat it with a rust and stone chip preventative then the rust will just come straight back and after spending the amount of time I did removing the...

Rust Repair Cut & Weld New Boot floor

by | Dec 9, 2015 | Projects, Videos

In Part 4 of my VL Commodore Project I am removing the boot (trunk) floor and welding a new rust repair section in, I had a little help from a friend and together I am very happy with the end result, the next video will be doing the Seam Sealer, Body Deadener and...

VL Turbo Project, Part 1

by | Dec 9, 2015 | News, Projects

This is the first video on my VL Commodore project, I will give you a look over the work that we have done so far. The car is a factory SL with an RB30 Nissan engine and has had a turbo bolted up to it after market, the car does have some rust in the usual places but...
Translate ยป