The Airgunsa AZ3 hte2 is a quality spray gun at a reasonable price, I got mine for $200 Aud delivered from eBay.
The gun can achieve top quality results with ease, for this demo I am using the 1.8mm and will be using automotive 2k primer on a little Toyota Echo that I repaired all the hail damage on.
This gun also comes in a 1.3mm setup for colour and clear.
The gun can achieve top quality results with ease, for this demo I am using the 1.8mm and will be using automotive 2k primer on a little Toyota Echo that I repaired all the hail damage on.
This gun also comes in a 1.3mm setup for colour and clear.
Having started watching your videos a few weeks ago (and getting fairly addicted) I’m delighted to see you recommend a gun I already owned! (Got it before I found your vids)
I’ve bought the gun for some DIY spraying.
I see you sometimes use a half mask and other times a full face, but as you spray 2pack paint, I wonder if it is non-isocyanate? Some people say I will need a full air fed face mask for that, but I dont know.
I appreciate you don’t usually have time to answer one-off questions, but have you done some videos about PPE?
Hi Peter, thanks for visiting my website and glad you’ve been enjoying my videos.
Check out this page, there’s a few posts on respirators, and as long as you have your skin and eyes covered or at least in a well ventelated area then yes a half mask will be totally fine.
As a guy made a mention to on the Moldex review, “If the military issue soldiers with them for all types of chemical warfare then of course it works for some 2 pack paint fumes” and I totally agree with him.
Check out the other vid too for a bit more info on breathable air.
http://thegunman.net.au/product-reviews/
Is this the the or the help version?
hello friend The guzman. I’m Sergio Varela of Santiago de Chile. I wish if I can help. the question is this I bought the AZ3 1.3 hvlp. and I consuming air compressor I have a 3hp I went up to 40 lbs. and I under 20 lbs. then I got the air pressure to 60 lbs and I kept 30 lbs. the other thing was delayed very little to lower the pressure and not maintained since it consumed too much air. the question is the problem of regulation or factory problem?
To all posters . It’s you its not the gun .help means high volume of air sprayed at low pressure meaning you need a big air tank.rp reduced pressure.you can keep all of em give me conventional . Reduce your material as thin as you want, crank the air good and high turn it down til your material is even across the fan pattern and get busy.screw the overpay if it comes back down and screws up your job your not using appropriate solvent and your not moving fast enoughenough
Do people still spray solvent?
good day greetings from Medellin Colombia I ask you a question that pistol would be better the sagola 3300 Gto car tech 1.3 or the Air gunza Az3 1.3 to give clear finishes (varnish)