Flow Coating is a great way to achieve the best gloss and depth from your paint.
The basic process is to paint your panel with base and clear then allow it to cure for at least 3 days then sand it back down and apply a further 2-3 coats of clear.
I will be using the SATAjet 5000-B RP 1.3mm Digital Spray Gun on my own VL Walkinshaw molded bonnet.
I am using Standox HS clear heated to help the drying and also thin it without too much reducer.
Watch this tutorial video and I will include loads of tips, tricks and real world methods that are easy to understand.




Translate »