Turbo Conversion

by | Dec 9, 2015 | Videos

in Part 5 of my VL Holden Commodore project I will take you through the conversion of the Nissan RB30 NA engine to a Turbo engine, I have listed everything that we needed to do the conversion and incase you missed anything I will list them here. Extractors to suit...

Under Body Protection & VL Update

by | Dec 9, 2015 | Projects, Videos

Underbody Protection is a very important part of doing rust repairs, if you don’t seal all the bare steel up and coat it with a rust and stone chip preventative then the rust will just come straight back and after spending the amount of time I did removing the...

Rust Repair Cut & Weld New Boot floor

by | Dec 9, 2015 | Projects, Videos

In Part 4 of my VL Commodore Project I am removing the boot (trunk) floor and welding a new rust repair section in, I had a little help from a friend and together I am very happy with the end result, the next video will be doing the Seam Sealer, Body Deadener and...

Prep, Paint & Polish VL Boot

by | Dec 9, 2015 | Automotive Refinishing, Videos

In part 3 of my VL Turbo Project I will be Preparing, Painting & Polishing the outside of the boot lid, I use my new SATAjet 5000B RP 1.3mm Digital for clear and was very happy with the results, plus the DeVilbiss SGK-600-BV 1.4mm for basecoat and again its the...
Translate ยป